National Repository of Grey Literature 12 records found  1 - 10next  jump to record: Search took 0.01 seconds. 
Utilization of circuit elements described by fractional-order dynamics in analog phase shifters
Zedka, Radim ; Šotner, Roman (referee) ; Petržela, Jiří (advisor)
This document deals with fractional passive dipole structures, their mathematical description, design methods and practical use with respect to limited frequency range. Two fractional dipole design methods are being described while one of them is used for practical realization of three fractional dipole samples. All of them are well measured and documented. Analog phase shifters implementing this fractional-order dipole are being discussed theoretically and they are practically constructed and measured. Concisely the fractional-order two-port design method implementing biquadratic filters is described.
Vertically polarized Yagi antenna with magnetic dipole
Weigel, Filip ; Pokorný, Michal (referee) ; Raida, Zbyněk (advisor)
This bachelor’s thesis deals with the principles of operation and simulation of planar Yagi antennas with a magnetic dipole. Simulation of electromagnetic field was performed in the simulator CST MICROWAVE STUDIO (CST MWS). The project compares results of simulations of several types of Yagi antennas. These antennas can be used for the communication along the living tissue (on-body communication).
Measurement of HV equipments by electronic bridge.
Kumičák, Ivan ; Pelikán, Luděk (referee) ; Krbal, Michal (advisor)
The main idea of this thesis is measurements of dielectric materials by using a device Tettex. The thesis is about basic physic properties of dielectric materials. The determination of a dielectric material is considered. The behavior of these materials in electrical fields and reasons, those can have an influence on it, are considered as well. In the text are described measuring methods of chosen parameters of dielectric materials by device Tettex and its functional principles. There are an evaluation of measurements, which were done, and a discussion about achieved results.
Planar and wired Yagi-Uda antennas
Křepela, Pavel ; Pokorný, Michal (referee) ; Mikulášek, Tomáš (advisor)
This work deals with the study of Yagi-Uda antennas, followed by analysis and design of planar antenna with wired reflector. The first part focused on the analysis of the antenna and parameters. Another part of the continuing investigation of the optimum parameters for a given antenna followed by a design in Wi-Fi 5 GHz band. The antenna is simulated in CST Microwave Studio. The final part devoted the results achieved
Software implementation of selected system modules for symbolic calculations
Zapletal, Jakub ; Věchet, Stanislav (referee) ; Březina, Tomáš (advisor)
This bachelor thesis is focused on the creation of models of the basic elements of the rotational and translational mechanics using electromechanical analogies. Based on the problematics of the complete matrix, transfer functions, which can be tested on models, are derived using various cofactors. In the C Sharp language, the base of models is implemented and a module which generates cofactors of the given system in symbolic form is created.
Axisymmetric antennas with metamaterials
Roman, Pavel ; Fiala, Pavel (referee) ; Raida, Zbyněk (advisor)
This project is focused on computer modeling of so-called meta-materials, and on the exploitation of metamaterials in the design of electrically small antennas. For modeling, COMSOL Multiphysics 3.3 was used. Simulations were focused on impedance matching of antennas. Antennas with metamaterials were compared with corresponding conventional antennas without metamaterial layers. The project does not investigate the creation of metamaterials; the project concentrates on their influence on crucial parameters of antennas. Next step this project is focused on optimalization this structure in program Matlab version R2009b. We used optimalization method PSO (swarms of particles) and results are comparing whit results calculating in COMSOL program.
Software implementation of selected system modules for symbolic calculations
Zapletal, Jakub ; Věchet, Stanislav (referee) ; Březina, Tomáš (advisor)
This bachelor thesis is focused on the creation of models of the basic elements of the rotational and translational mechanics using electromechanical analogies. Based on the problematics of the complete matrix, transfer functions, which can be tested on models, are derived using various cofactors. In the C Sharp language, the base of models is implemented and a module which generates cofactors of the given system in symbolic form is created.
Measurement of HV equipments by electronic bridge.
Kumičák, Ivan ; Pelikán, Luděk (referee) ; Krbal, Michal (advisor)
The main idea of this thesis is measurements of dielectric materials by using a device Tettex. The thesis is about basic physic properties of dielectric materials. The determination of a dielectric material is considered. The behavior of these materials in electrical fields and reasons, those can have an influence on it, are considered as well. In the text are described measuring methods of chosen parameters of dielectric materials by device Tettex and its functional principles. There are an evaluation of measurements, which were done, and a discussion about achieved results.
Planar and wired Yagi-Uda antennas
Křepela, Pavel ; Pokorný, Michal (referee) ; Mikulášek, Tomáš (advisor)
This work deals with the study of Yagi-Uda antennas, followed by analysis and design of planar antenna with wired reflector. The first part focused on the analysis of the antenna and parameters. Another part of the continuing investigation of the optimum parameters for a given antenna followed by a design in Wi-Fi 5 GHz band. The antenna is simulated in CST Microwave Studio. The final part devoted the results achieved
Utilization of circuit elements described by fractional-order dynamics in analog phase shifters
Zedka, Radim ; Šotner, Roman (referee) ; Petržela, Jiří (advisor)
This document deals with fractional passive dipole structures, their mathematical description, design methods and practical use with respect to limited frequency range. Two fractional dipole design methods are being described while one of them is used for practical realization of three fractional dipole samples. All of them are well measured and documented. Analog phase shifters implementing this fractional-order dipole are being discussed theoretically and they are practically constructed and measured. Concisely the fractional-order two-port design method implementing biquadratic filters is described.

National Repository of Grey Literature : 12 records found   1 - 10next  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.